Tile installers argue about wet saws and dry-cut saws all the time, and both have a place. The right choice comes down to where you work, how much cleanup you can live with, and how often you cut.

Wet tile saws

A wet saw sends water over the blade to keep it cool and keep dust down. It is the traditional choice for heavy daily cutting and for natural stone.

  • Cool, smooth cuts on hard materials
  • Very little airborne dust
  • Messy: water and slurry on the floor and tools
  • Needs a water supply and a place to drain

Dry-cut tile saws

A dry-cut saw uses a vented diamond blade and a dust collection system instead of water. Because there is no slurry, they are popular for finished spaces, remodels and quick in-and-out jobs.

  • No water to haul, spill or clean up
  • Faster setup and teardown
  • Needs a good vacuum or dust collector to control dust
  • Blade choice and technique matter more on hard porcelain

We carry iQ dry-cut saws, including the iQ 10 in. dry-cut tile saw with stand and the compact iQ 7 in. Cyclone tabletop saw. See all tile saws.

Which should you buy?

  • Remodels and occupied homes: dry-cut, because cleanup is simpler.
  • Large new-construction jobs and stone: a wet saw is often the better fit.
  • Mixed work: many crews own both and choose per job.

Keep the blade sharp

A glazed blade cuts slowly and chips tile. A dressing stone exposes fresh diamond and extends blade life, and it is a cheap fix compared to a new blade. See the iQ 8 in. dressing stone and our full range of tile saw blades.

Maintenance that saves downtime

  • Replace the vacuum filter and check motor brushes on a regular schedule.
  • Keep the table surface clean so cuts stay square.
  • Use the right blade for the material, not just the cheapest one.

The iQ tune-up kit for the TS244 bundles the common wear parts in one box. Questions on picking a saw? Call 833-622-0645 or email orders@floortoolstore.com.

Tile saws, Tile tools